Redistribute Bgp - Dell C9000 Series Reference Manual

When an LSP with an internal metric is received, the Dell Networking OS considers the
route cost while considering the advertised cost to reach the destination.
Redistributed routing information is filtered with the distribute-list out
command to ensure that the routes are properly passed to the receiving routing
protocol.
How a metric value assigned to a redistributed route is advertised depends on how on
the configuration of the metric-style command. If the metric-style command is
set for Narrow or Transition mode and the metric value in the redistribute
command is set to a number higher than 63, the metric value advertised in LSPs is 63. If
the metric-style command is set for Wide mode, the metric value in the
redistribute command is advertised.
Related
Commands

redistribute bgp

Redistribute routing information from a BGP process.
C9000 Series
Syntax
redistribute bgp AS number [level-1| level-1-2 | level-2] [metric
metric-value] [metric-type {external| internal}] [route-map map-
name]
To return to the default values, use the no redistribute bgp command with the
appropriate parameters.
Parameters
AS number
level-1
level-1-2
level-2
• default-information originate
• distribute-list out — suppresses networks from being advertised in updates. This
command filters redistributed routing information.
Enter a number that corresponds to the autonomous system
number. The range is from 1 to 65355.
(OPTIONAL) Routes are independently redistributed into IS-IS
Level 1 routes only.
(OPTIONAL) Routes are independently redistributed into IS-IS
Level 1 and Level 2 routes.
(OPTIONAL) Routes are independently redistributed into IS-IS as
Level 2 routes only. This setting is the default.
— generates a default route for the IS-IS domain.
Intermediate System to Intermediate System (IS-IS) 1100