Mode - Dell C9000 Series Reference Manual

Command Modes CONFIGURATION (conf-frrp)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.11.1
8.3.11.1
8.3.7.0
8.2.1.0
7.4.1.0

mode

Set the Master or Transit mode of the ring.
C9000 Series
Syntax
mode {master | transit}
To reset the mode, use the no mode {master | transit} command.
Parameters
master
transit
Defaults Mode None
Command Modes CONFIGURATION (conf-frrp)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced.
Enter the keyword master to set the Ring node to Master mode.
Enter the keywordtransit to set the Ring node to Transit
mode.
Force10 OS Resilient Ring Protocol (FRRP) 890