Device-Role - Dell C9000 Series Reference Manual

Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.7(0.0)
8.3.19.0
8.3.11.1
8.3.7.1

device-role

Specify the role of the device attached to the port.
C9000 Series
Syntax
device-role {host | router}
To reset the device role, use the no device-role {host | router} command.
Parameters
host
router
Defaults none
Command Modes POLICY LIST CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9.(0.0)
9.8(0.0)
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Introduced on the S6000-ON.
Added support for VRF.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Enter the keyword host to set the device-role as host.
Enter the keyword router to set the device-role as router.
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Neighbor Discovery Protocol (NDP) 1442