Arp - Dell C9000 Series Reference Manual

• show arp
• show arp retries
• show hosts
• show ip cam linecard
• show ip fib linecard
• show ip flow
• show ip interface
• show ip management-route
• show ipv6 management-route
• show ip protocols
• show ip route
• show ip route list
• show ip route summary
• show ip traffic
• show tcp statistics

arp

To associate an IP address with a MAC address in the switch, use address resolution protocol (ARP).
C9000 Series
Syntax
arp [vrf vrf-name]ip-address mac-address interface
To remove an ARP address, use the no arp ip-address command.
Parameters
vrf vrf-name
ip-address
mac-address
interface
Enter a VRF name to configure an ARP entry for that VRF. Use
the VRF option after the keyword arp to configure a static arp
on that particular VRF.
Enter an IP address in dotted decimal format.
Enter a MAC address in nnnn.nnnn.nnnn format.
(OPTIONAL) Enter any of the following keywords and slot/port
or number information:
• For the Management interface, enter the keyword
ManagementEthernet then the slot/port information. The
slot range is from 0 to 1 and the port range is 0.
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
IPv4 Routing 1166