Dell C9000 Series Reference Manual page 1555

Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.4(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
Usage Information This command is useful in isolating routing problems between the OSPF and the RTM.
For example, if a route is missing from the RTM/FIB but is visible from the display output
of this command, the problem is with downloading the route to the RTM.
This command has the following limitations:
•
•
Example
Dell#show ip ospf 100 route
Prefix
1.1.1.1
3.3.3.3
13.0.0.0
150.150.150.0
172.30.1.0
Dell#
EXEC
EXEC Privilege
Description
Introduced on the C9010.
Added support for VRF on all platforms (Except MXL and
STOMP).
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
The display output is sorted by prefixes; intra-area ECMP routes are not displayed
together.
For Type 2 external routes, Type 1 cost is not displayed.
Cost Nexthop
1 0.0.0.0
2 13.0.0.3
1 0.0.0.0
2 13.0.0.3
2 13.0.0.3
Interface Area
Lo 0 0
Te 0/47 1
Te 0/47 0
Te 0/47 -
Te 0/47 1
Open Shortest Path First (OSPFv2 and OSPFv3)
Type
Intra-Area
Intra-Area
Intra-Area
External
Intra-Area
1555