Dell C9000 Series Reference Manual page 1103

route-map map-
name
Defaults Refer to Parameters.
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.12.0
7.5.1.0
6.3.1.0
Usage Information How a metric value assigned to a redistributed route is advertised depends on how on
the configuration of the metric-style command. If the metric-style command is
set for Narrow mode and the metric value in the redistribute ospf command is set
to a number higher than 63, the metric value advertised in LSPs is 63. If the metric-
style command is set for wide mode, the metric value in the redistribute ospf
command is advertised.
•
external
map-name is an identifier for a configured route map. The route
map should filter imported routes from the source routing
protocol to the current routing protocol.
If you do not specify a map-name, all routes are redistributed. If
you specify a keyword, but fail to list route map tags, no routes
are imported.
ROUTER ISIS (for IPv4)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for IPv6 ISIS.
Introduced.
Intermediate System to Intermediate System (IS-IS) 1103