Dell C9000 Series Reference Manual page 1236

Version
6.4.1.0
Usage Information The following describes the show tcp statistics cp command shown in the
following example.
Field
Rcvd:
0 checksum
error...
329 packets...
17 dup...
0 partially...
7 out-of-order...
0 packets with
data after window
0 packets after
close
0 window probe
packets...
41 dup ack...
10184 ack...
Sent:
25 control
packets...
11603 data
packets...
24 data packets
retransmitted
Description
Introduced
Description
Displays the number and types of TCP packets received by the
switch.
• Total = total packets received
• no port = number of packets received with no designated
port
Displays the number of packets received with the following:
• checksum errors
• bad offset to data
• too short
Displays the number of packets and bytes received in sequence.
Displays the number of duplicate packets and bytes received.
Displays the number of partially duplicated packets and bytes
received.
Displays the number of packets and bytes received out of order.
Displays the number of packets and bytes received that exceed
the switch's window size.
Displays the number of packet received after the TCP
connection was closed.
Displays the number of window probe and update packets
received.
Displays the number of duplicate acknowledgement packets
and acknowledgement packets with data received.
Displays the number of acknowledgement packets and bytes
received.
Displays the total number of TCP packets sent and the number
of urgent packets sent.
Displays the number of control packets sent and the number
retransmitted.
Displays the number of data packets sent.
Displays the number of data packets resent.
IPv4 Routing 1236