Dell C9000 Series Reference Manual page 1214

Networking command-line reference guide
Hide thumbs Also See for C9000 Series:
Table of Contents

Advertisement

Field
Name servers
are...
Host
Flags
TTL
Type
Address
Example
Dell#show hosts
Default domain is not set
Name/address lookup uses static mappings
Name servers are not set
Host
-------- -----
ks
4200-1
1230-3
ZZr
Z10-3
Dell#
Related
traceroute
Commands
ip host
Description
If DNS is not enabled, the Name/Address lookup is static
mapping
Lists the name servers, if configured.
Displays the host name assigned to the IP address.
Classifies the entry as one of the following:
perm — the entry was manually configured and will not
time out
temp — the entry was learned and will time out after 72
hours of inactivity.
Also included in the flag is an indication of the validity of the
route:
ok — the entry is valid.
ex — the entry expired.
?? — the entry is suspect.
Displays the amount of time until the entry ages out of the
cache. For dynamically learned entries only.
Displays IP as the type of entry.
Displays the IP addresses assigned to the host.
Flags
TTL
----
(perm, OK) -
(perm, OK) -
(perm, OK) -
(perm, OK) -
(perm, OK) -
— views the DNS resolution.
— configures a host.
Type
Address
----
-------
IP
2.2.2.2
IP
192.68.69.2
IP
192.68.99.2
IP
192.71.18.2
IP
192.71.23.1
IPv4 Routing
1214

Advertisement

Table of Contents
loading

Table of Contents