Show Config - Dell C9000 Series Reference Manual

show config

Display the interface configuration.
C9000 Series
Syntax
show config
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
6.2.1.0
Example
Dell(conf)#int peg 255/1/0
Dell(conf-if-pegi-255/1/0)#sho con
!
interface peGigE 255/1/0
dampening 20 200 800 80
no shutdown
Dell(conf-if)# show conf
!
interface TenGigabitEthernet 1/7
Dell(conf-if)#
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
no ip address
switchport
no shutdown
Interfaces 955