Dell C9000 Series Reference Manual page 1296

Field
Destination
Gateway
Dist/Metric
Last Change
Example
Dell#show ipv6 route
Codes: C - connected, L - local, S - static, R - RIP,
Originated,
type 1,
default,
Gateway of last resort is not set
Example
Dell#show ipv6 route summary
(Summary)
Route Source
connected
static
Description
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Identifies the route's destination IPv6 address.
Identifies whether the route is directly connected and on which
interface the route is configured.
Identifies if the route has a specified distance or metric.
Identifies when the route was last changed or configured.
B - BGP, IN - internal BGP, EX - external BGP,LO - Locally
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,
L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate
Destination
-----------------------------------------------------
C 2::/64 [0/0]
Direct, Te 10/1, 00:01:53
L fe80::/10 [0/0]
Direct, Nu 0, 00:01:53
Active Routes
5
0
B = BGP
IN = internal BGP
EX = external BGP
LO = Locally Originated
O = OSPF
IA = OSPF inter-area
N1 = OSPF NSSA external type 1
N2 = OSPF NSSA external type 2
E1 = OSPF external type 1
E2 = OSPF external type 2
i = IS-IS
L1 = IS-IS level-1
L2 = IS-IS level-2
IA = IS-IS inter-area
* = candidate default
> = non-active route
+ = summary routes
Dist/Metric,
Non-active Routes
0
0
Gateway, Last Change
IPv6 Basics 1296