Show Crypto Ipsec Transform-Set - Dell C9000 Series Reference Manual

Defaults none
Command Modes CONF-CRYPTO-POLICY
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.2(0.0)
Usage Information

show crypto ipsec transform-set

Display the transform set configuration.
C9000 Series
Syntax
show crypto ipsec transform-set name
Parameters
name
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.2(0.0)
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000, S4810, and S4820T.
• This command is only available in the ipsec-manual model.
• The key information entry is associated with the global method for enabling clear
text or encrypted display in the running config.
Enter the name of the transform set.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000, S4810, and S4820T.
Internet Protocol Security (IPSec) 1161