Show Revision - Dell C9000 Series Reference Manual

Version
9.9(0.0)
Example
Dell#show power detail pe 2 stack‐unit 1
Unit Total
Inline
Power
Consumed Remaining
(Watts) (Watts)
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
2/1
190.00

show revision

View the PoE controller firmware version running on the port extender.
C9000 Series
Syntax
show revision {pe pe-id stack-unit unit number}
From a PE console, use show revision to view the revision levels.
Parameters
pe pe-id
stack-unit unit-
number
Defaults None
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Example
Dell#show revision pe 0
DEVICE IMAGE INFORMATION :
-----------------------------------------------------
Description
Introduced on the C9010.
System Redundancy
Power Power
Power
Available Consumed Consumed
(Watts) (Watts)
2000.00 150
1222.00
Enter the keyword pe and the port extender ID. Range is from 0
to 255.
Enter the keyword stack-unit and the unit number. Range is
from 0 to 7.
Description
Introduced on the C9010 and C1048P.
Type Version
Inline Inline
Power Power
Threshold Available Allocated
(Watts) (%)
150 90
Target
Inline Inline
Power Power
(Watts) (Watts)
1530.00 308.00
Port Extenders (PE) 1761