Dell C9000 Series Reference Manual page 1210

static
dynamic
summary
Default Display only the ARP entries learned on the Control Processor.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.5.1.0
8.3.7.0
8.2.1.0
8.1.1.0
7.9.1.0
7.8.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage Information Use the show arp command to display the ARP entries learned on the Control
Processor and Route Processor.
The following example shows two VLANs that are associated with a private VLAN
(PVLAN) (refer to
The following describes the show arp command shown in the following example.
Field
Protocol
(OPTIONAL) Enter the keyword static to display manually-
entered ARP entries.
(OPTIONAL) Enter the keyword dynamic to display dynamically-
learned ARP entries.
(OPTIONAL) Enter the keyword summary to view a summary of
ARP entries.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Added support for 4094 VLANs on the E-Series ExaScale (the
prior limit was 2094).
Introduced on the E-Series ExaScale.
Introduced VRF on the E-Series.
Augmented to display local ARP entries learned from private
VLANs (PVLANs).
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Private VLAN (PVLAN)).
Description
Displays the protocol type.
IPv4 Routing 1210