Debug Isis Update-Packets - Dell C9000 Series Reference Manual

Parameters
vrf vrf-name
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
6.3.1.0

debug isis update-packets

Enable debugging on link state PDUs (LSPs) that a router detects.
C9000 Series
Syntax
debug isis update-packets [interface][vrf vrf-name]
To turn off debugging, use the no debug isis update-packets [interface]
command.
Parameters
interface
(OPTIONAL) Enter the keyword vrf followed by the name of the
VRF to enable debugging information on IS-IS corresponding to
that VRF. This information contains spf trigger detail tied to the
VRF that you specify. When SPF is triggered, this debugging
information is displayed.
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Added support for VRF. Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced.
(OPTIONAL) Identifies the interface type slot/port as one of the
following:
Intermediate System to Intermediate System (IS-IS) 1054