Clear Ipv6 Neighbors - Dell C9000 Series Reference Manual

clear ipv6 neighbors

Delete all entries in the IPv6 neighbor discovery cache or neighbors of a specific interface. Static entries are
not removed using this command.
C9000 Series
Syntax
clear ipv6 neighbors [ipv6 address] | interface interface | vrf
vrf name]
Parameters
ipv6-address
vrf vrf-name
interface interface
Command Modes
Enter the IPv6 address of the neighbor in the x:x:x:x::x format to
remove a specific IPv6 neighbor.
(OPTIONAL) Enter the keyword vrf followed by the name of the
VRF to clear the neighbor corresponding to that VRF.
To remove all neighbor entries learned on a specific interface,
enter the keyword interface then the interface type and slot/
port or number information of the interface:
Enter one of the following keywords with slot/port or number to
clear information about the IPv6 neighbors learned on the
specified interface:
•
•
•
•
•
•
• EXEC Privilege
NOTE: The :: notation specifies successive hexadecimal
fields of zero.
NOTE: If you do not specify this option, the neighbors in
the default VRF are cleared.
For a 1–Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information
For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet then the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
For a port-channel interface, enter the keyword port-
channel with a port-channel number. The range of port-
channel numbers is from 1 to 4096.
For a VLAN interface, enter the keywordvlan then a
number from 1 to 4094.
For a tunnel interface, enter the keyword tunnel.
Neighbor Discovery Protocol (NDP) 1441