clear ip route
Clear one or all routes in the routing table.
C9000 Series
Syntax
clear ip route {* | ip-address mask}
Parameters
*
ip-address mask
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.9.1.0
7.6.1.0
7.5.1.0
6.2.1.1
Related
Commands
Enter an asterisk (*) to clear all learned IP routes.
Enter a specific IP address and mask in dotted decimal format to
clear that IP address from the routing table.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced VRF on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
•
ip route
— assigns an IP route to the switch.
•
show ip route
— views the routing table
•
show ip route summary
— views a summary of the routing table.
IPv4 Routing
1175