Mac-Address-Table Aging-Time - Dell C9000 Series Reference Manual

interface interface
vlan vlan-id
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.5.1.0
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.1

mac-address-table aging-time

Specify an aging time for MAC addresses to remove from the MAC address table.
C9000 Series
Syntax
mac-address-table aging-time seconds
Parameters
seconds
Enter the following keywords and slot/port or number
information:
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Enter the keyword vlan then a VLAN ID number from 1 to 4094.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Added support for sticky MAC addresses.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter either zero (0) or a number as the number of seconds
before MAC addresses are relearned. To disable aging of the
Layer 2 1309