Version
E-Series legacy
command
Example (Static)
Dell#show ip mroute static
Mroute: 23.23.23.0/24, interface: Lo 2
Protocol: static, distance: 0, route-map: none, last change:
00:00:23
Example
Dell#show ip mroute snooping
(Snooping)
IPv4 Multicast Snooping Table
(*, 224.0.0.0), uptime 17:46:23
(*, 225.1.2.1), uptime 00:04:16
(165.87.1.7, 225.1.2.1), uptime 00:03:17
Example (VLT)
Dell#show ip mroute vlt
IP Multicast Routing Table
Flags: S – Synced
(*, 225.1.1.1), uptime 00:39:33 flags: S
Incoming interface: Vlan 10
Spanned outgoing interface list:
Vlan 20 (S)
Vlan 30
(50.1.1.2, 225.1.1.1), uptime 00:39:33 flags: S
Incoming interface: Vlan 10
Spanned outgoing interface list:
Vlan 20 (S)
Usage Information The following describes the show ip mroute command shown in the following
example.
Field
(S, G)
uptime
Incoming
interface
Description
Incoming vlan: Vlan 2
Outgoing interface list:
GigabitEthernet 4/13
Incoming vlan: Vlan 2
Outgoing interface list:
GigabitEthernet 4/11
GigabitEthernet 4/13
Incoming vlan: Vlan 2
Outgoing interface list:
GigabitEthernet 4/11
GigabitEthernet 4/13
GigabitEthernet 4/20
Description
Displays the forwarding entry in the multicast route table.
Displays the amount of time the entry has been in the multicast
forwarding table.
Displays the reverse path forwarding (RPF) information towards
the source for (S,G) entries and the RP for (*,G) entries.
Multicast
1399