Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Related
show lacp
Commands
debug lacp
Debug LACP (configuration, events, and so on).
C9000 Series
Syntax
debug lacp {config | events | pdu [interface-type [in | out]]}
To disable LACP debugging, use the no debug {config | events | pdu
[interface-type [in | out]]} command.
Parameters
config
events
pdu
interface-type in |
out
•
EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— displays the LACP configuration.
(OPTIONAL) Enter the keyword config to debug the LACP
configuration.
(OPTIONAL) Enter the keyword events to debug the LACP
event information.
(OPTIONAL) Enter the keyword pdu to debug the LACP Protocol
Data Unit information.
(OPTIONAL) Enter the following keywords and slot/port or
number information:
Link Aggregation Control Protocol (LACP)
1350