Dell C9000 Series Reference Manual page 1575

Parameters
interface
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.1.(0.0)
8.3.19.0
7.8.1.0
7.4.1.0
Example
Dell#debug ipv6 ospf packet
OSPFv3 packet related debugging is on for all interfaces
05:21:01 : OSPFv3: Sending, Ver:3, Type:1(Hello), Len:40, Router
ID:223.255.255.254, Area ID:0, Inst:0, on Po 255
05:21:03 : OSPFv3: Received, Ver:3, Type:1(Hello), Len:40, Router
ID:223.255.255.255, Area ID:0, Chksum:a177, Inst:0, from Vl 100
05:20:25 : OSPFv3: Sending, Ver:3, Type:4(LS Update), Len:580,
Router
ID:223.255.255.254, Area ID:0, Inst:0, on Vl 1000
07:21:40 : OSPFv3: Received, Ver:3, Type:1(Hello), Len:40, Router
ID:223.255.255.254, Area ID:0, Chksum:af8f, Inst:0, from Te 0/36
Dell#
Command Fields
Lines
Beginning
With or
Including
OSPFv3...
(OPTIONAL) Enter one of the following keywords and slot/port
or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Port Channel interface, enter the keyword port-
channel then a number. The range is 1 to 128.
• For a tunnel interface, enter the keyword tunnel then a
number. The range is 1 to 16383.
• For a VLAN, enter the keyword vlan then a number from 1
to 4094.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4810 and Z9000.
Introduced on the S4820T.
Added support for C-Series.
Introduced on E-Series.
Description
Debugging is on for all OSPFv3 packets and all interfaces.
Open Shortest Path First (OSPFv2 and OSPFv3) 1575