Clear Ip Ospf - Dell C9000 Series Reference Manual

clear ip ospf

Clear all OSPF routing tables.
C9000 Series
Syntax
clear ip ospf process-id [vrf {vrf name}]|[process]
Parameters
process-id
vrf name
process
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.4 (0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
6.1.1.1
Enter the OSPF Process ID to clear a specific process. If no
Process ID is entered, all OSPF processes are cleared.
Enter the VRF process identifier to tie the OSPF instance to the
VRF. All network commands under this OSPF instance are then
tied to the VRF instance.
(OPTIONAL) Enter the keyword process to reset the OSPF
process.
Description
Introduced on the C9010.
Added support for VRF on all platforms ( Except MXL and
STOMP )
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Open Shortest Path First (OSPFv2 and OSPFv3) 1487