Per-Port Qos Commands; Dot1P-Priority - Dell C9000 Series Reference Manual

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

service-class dot1p-mapping

Per-Port QoS Commands

Per-port QoS (port-based QoS) allows you to define the QoS configuration on a per-physical-port basis.

Assign a value to the IEEE 802.1p bits on the traffic this interface receives.

C9000 Series

dot1p-priority priority-value

To delete the IEEE 802.1p configuration on the interface, use the no dot1p-priority

priority-value

Introduced on the C9010.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on MXL 10/40GbE Switch IO Module.

— Identifies the class map.

Enter a value from 0 to 7.

Queue Number

Quality of Service (QoS)

Table of Contents