Debug Fip Snooping - Dell C9000 Series Reference Manual

debug fip snooping

Enable debugging on FIP snooping.
C9000 Series
Syntax
debug fip-snooping [all | acl | error | ifm | info | ipc | tx |
rx ]
Parameters
all
acl
error
ifm
info
ipc
tx
rx
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.x.x.x
9.2(0.2)
8.3.19.0
8.3.12.0
Enter the keyword all to enable debugging on all the options.
Enter the keyword acl for ACL-specific debugging.
Enter the keyword error for error-specific debugging.
Enter the keyword ifm for IFM-specific debugging.
Enter the keyword info for information-specific debugging.
Enter the keyword ipc for IPC-specific debugging.
Enter the keyword tx for packet transmit-specific debugging.
Enter the keyword rx for packet receive-specific debugging.
Description
Introduced on the C9000 Series.
Added the tx parameter.
Introduced on the S4820T.
Introduced on the S4810.
FCoE Transit 854