Debug Gvrp - Dell C9000 Series Reference Manual

Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
Related show gvrp statistics
Commands

debug gvrp

Enable debugging on GVRP.
C9000 Series
Syntax
debug gvrp {config | events | pdu}
To disable debugging, use the no debug gvrp {config | events | pdu}
command.
Parameters
config
event
pdu
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on C-Series, E-Series, and S-Series
— displays the GVRP statistics.
Enter the keyword config to enable debugging on the GVRP
configuration.
Enter the keyword event to enable debugging on the JOIN/
LEAVE events.
Enter the keyword pdu then one of the following Interface
keywords and slot/port or number information:
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 4096.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
GARP VLAN Registration (GVRP) 897