Lacp Port-Priority - Dell C9000 Series Reference Manual

lacp port-priority

To influence which ports will be put in Standby mode when there is a hardware limitation that prevents all
compatible ports from aggregating, configure the port priority.
C9000 Series
Syntax
lacp port-priority priority-value
To return to the default setting, use the no lacp port-priority priority-value
command.
Parameters
priority-value
Defaults 32768
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Enter the port-priority value. The higher the value number, the
lower the priority. The range is from 1 to 65535. The default is
32768.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Link Aggregation Control Protocol (LACP) 1353