Show Ip Dhcp Binding - Dell C9000 Series Reference Manual

Usage Information Allocate at least one FP block to ipmacacl before you can enable IP+MAC Source
Address Validation.
1
2
3

show ip dhcp binding

Display the DHCP binding table.
C9000 Series
Syntax
show ip dhcp binding
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
Example
Dell# show ip dhcp binding
IP address
1.1.1.253
1.1.1.254
Use the cam-acl l2acl command from CONFIGURATION mode.
Save the running-config to the startup-config.
Reload the system.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Hardware address
00:00:00:00:00:10
00:00:00:00:00:20
Lease expiration
Jan 08 2014 23:57
Jan 08 2014 23:57
Dynamic Host Configuration Protocol (DHCP)
Type
Automatic
Automatic
835