Dual Homing; Commit - Dell C9000 Series Reference Manual

PE MAC: f8:b1:56:00:01:04
Interface Errors:
Dell#show pe 9
Codes:
Reason: CTM - Card Type Mismatch, CAM - CAM ACL Mismatch
Offline Reason: UNP - Unit Not Present,
PE-ID assigned: 9
Status: online
System Mac: f8:b1:56:00:01:28
PE Up Time: 08:36:56
PE Discovery Status: Provisioned PE
User Configured Cascade Ports: Te 1/9(A),Te 1/16(I)
Cascade LAG: Po 267(Up)
----------------------------------------------------------------------
Stack-id
---------------------------------------------------------------------

Dual Homing

Use the commands in the following section to setup the configurations on a port extender connected in a
dual-homing environment.

commit

Use commit to apply the common configurations made in the Configuration Terminal Batch mode.
C9000 Series
Syntax
commit
Default None
Command Modes CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
TenGigabitEthernet 1/16 - Error State
A - Active, I - Inactive
SVM - Software Version Mismatch, UE - Unknown Error
ICE - IPC CP Error, IRE - IPC RP Error
ISE - IPC Setup Error, CVE - Card Validation Error
Status Reason
0 online
1 online
2 online
3 online
Type
- C1048P f8:b1:56:00:02:24
- C1048P f8:b1:56:00:01:28
- C1048P f8:b1:56:00:01:90
- C1048P 00:00:ab:00:00:2c
UnitMac No. of Ports
Port Extenders (PE)
52
52
52
52
1728