Ip Dhcp Snooping Database - Dell C9000 Series Reference Manual

Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.5.1.0
8.3.7.0
8.3.1.0
7.8.1.0
Related show ip dhcp snooping
Commands

ip dhcp snooping database

Delay writing the binding table for a specified time.
C9000 Series
Syntax
ip dhcp snooping database write-delay minutes
Parameters
minutes
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the C-Series and S-Series.
— displays the contents of the DHCP binding table.
The range is from 5 to 21600.
Description
Introduced on the C9010.
Dynamic Host Configuration Protocol (DHCP) 830