show ip protocols
View information on all routing protocols enabled and active on the switch.
C9000 Series
Syntax
show ip protocols
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Example
Dell#show ip protocols
Routing Protocol is "bgp 1"
•
EXEC
•
EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Regular evaluation optimization enabled/disabled added to
display output.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Cluster Id is set to 20.20.20.3
Router Id is set to 20.20.20.3
Fast-external-fallover enabled
Regular expression evaluation optimization enabled
Capable of ROUTE_REFRESH
For Address Family IPv4 Unicast
BGP table version is 0, main routing table version 0
Distance: external 20 internal 200 local 200
Neighbor(s):
Address : 20.20.20.2
IPv4 Routing
1226