Show Track - Dell C9000 Series Reference Manual

show track

Display information about tracked objects, including configuration, current tracked state (UP or DOWN), and
the clients which are tracking an object.
C9000 Series
Syntax
show track [object-id [brief] | interface [brief] [vrf vrf-name] |
ip route [brief] [vrf vrf-name] | resolution | vrf vrf-name
[brief] | brief]
Parameters
object-id
interface
ip route
resolution
brief
vrf vrf-name
Command Modes EXEC Privilege
Command History
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
• track interface ip routing
IPv4 Layer 3 interface.
• track interface line-protocol
state of a Layer 2 interface.
• track ip route metric threshold
IPv4 route metric.
• track ip route reachability
IPv4 route.
(OPTIONAL) Display information on the specified tracked object.
The range is 1 to 500.
(OPTIONAL) Display information on all tracked interfaces (Layer
2 and IPv4 Layer 3).
(OPTIONAL) Display information on all tracked IPv4 routes.
(OPTIONAL) Display information on the configured resolution
values used to scale protocol-specific route metrics. The range
is 0 to 255.
(OPTIONAL) Display a single line summary of the tracking
information for a specified object, object type, or all tracked
objects.
(OPTIONAL) E-Series only: Display information on only the
tracked objects that are members of the specified VRF instance.
The maximum is 32 characters. If you do not enter a VRF name,
information on the tracked objects from all VRFs displays.
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Introduced on the S6000-ON.
– configures object tracking on the routing status of an
– configures object tracking on the line-protocol
– configures object tracking on the threshold of an
– configures object tracking on the reachability of an
Object Tracking 1462