Interface Managementethernet - Dell C9000 Series Reference Manual

Related
interface
Commands
interface null
interface port-channel
interface vlan

interface ManagementEthernet

Configure the Management port on the system (either the Primary or Standby RPM).
C9000 Series
Syntax
interface ManagementEthernet slot/port
Parameters
slot/port
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.11.1
8.1.1.0
7.5.1.0
6.4.1.0
Usage Information You cannot delete a Management port.
The Management port is enabled by default (no shutdown). To assign an IP address to
the Management port, use the ip address command.
— configures a physical interface.
— configures a Null interface.
— configures a port channel.
— configures a VLAN.
Enter the keyword ManagementEthernet, then the slot
number (0 or 1) and port number zero (0).
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S55, S60, and S4810.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced
Interfaces 935