Show Running-Config Monitor Session - Dell C9000 Series Reference Manual

Version
9.9(0.0)
9.5(0.1)
9.4.0.0
9.0.2.0
8.3.19.0
8.3.7.0
8.3.11.1
8.1.1.0
7.7.1.0
7.5.1.0
7.4.1.0
Example
Dell#show monitor session
SessID Source Destination Dir Mode SourceIP DestIP DSCP TTL Drop Rate
----- -----
Related monitor session
Commands

show running-config monitor session

Display the running configuration of all monitor sessions or a specific session.
C9000 Series
Syntax
show running-config monitor session {session-ID}
To display the running configuration for all monitor sessions, use the show running-
config monitor session command.
Parameters
session-ID
Defaults none
Command Modes
Description
Introduced on the C9010.
Introduced on the Z9500.
Added support for the RPM / ERPM.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
---------- --- ----
1 PeGi 0/0/0 Te 10/2
— creates a monitoring session.
(OPTIONAL) Enter a session identification number. The range
from 0 to 65535.
• EXEC
-------- ------ ---- --- --- ---
rx Port N/A N/A N/A N/A No N/A
Port Monitoring 1768