Clear Management Application Pkt-Cntr; Management Egress-Interface-Selection - Dell C9000 Series Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.2.(0.0)

clear management application pkt-cntr

Clear management application packet counters for all management application types.
C9000 Series
Syntax
clear management application pkt-cntr
Defaults None.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.2.(0.0)

management egress-interface-selection

To make configured application traffic egress through the management port instead of the front-end (FE)
port, enable and configure a management egress interface.
C9000 Series
Syntax
management egress-interface-selection
To disable and remove management egress interface selection (EIS) configurations, use
the no management egress-interface-selection command.
Defaults None.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000, S4810, and S4820T.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000, S4810, and S4820T.
Interfaces 1014