Show Ip Igmp Interface - Dell C9000 Series Reference Manual

show ip igmp interface

View information on the interfaces participating in IGMP.
C9000 Series
Syntax
show ip igmp interface [interface]
Parameters
interface
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
E-Series legacy
command.
Usage Information IGMP commands accept only non-VLAN interfaces — specifying VLAN does not yield
results.
(OPTIONAL) Enter the interface type and slot/port information:
•
•
•
•
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
For a Loopback interface, enter the keyword loopback
then a number from 0 to 16383.
For a port channel interface, enter the keywords port-
channel then a number.
For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Internet Group Management Protocol (IGMP) 1140