Dell C9000 Series Reference Manual page 1101

metric metric-
value
metric-type
{external| internal}
route-map map-
name
Defaults IS-IS Level 2 routes only
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.12.0
7.5.1.0
6.3.1.0
Usage Information BGP to IS-IS redistribution supports "match" options using route maps. You can set the
metric value, level, and metric-type of redistributed routes by the redistribution
command. You can "set" more advanced options using route maps.
Example
Dell(conf)# router is
Dell(conf-router_isis)# redistribute bgp 1 level-1 metric 32
metric-type
external route-map rmap-isis-to-bgp
Dell(conf-router_bgp)#show running-config isis
(OPTIONAL) The value used for the redistributed route. Use a
metric value that is consistent with the destination protocol. The
range is from 0 to 16777215. The default is 0.
(OPTIONAL) The external link type associated with the default
route advertised into a routing domain. The two options are:
•
external
•
internal
map-name is an identifier for a configured route map. The route
map filters imported routes from the source routing protocol to
the current routing protocol.
If you do not specify a map-name, all routes are redistributed. If
you specify a keyword, but fail to list route map tags, no routes
are imported.
ROUTER ISIS (for IPv4)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for IPv6 ISIS.
Introduced.
Intermediate System to Intermediate System (IS-IS) 1101