Clear Tcp Statistics - Dell C9000 Series Reference Manual

clear tcp statistics

Clear TCP counters.
C9000 Series
Syntax
clear tcp statistics [all | cp | rp]
Parameters
all
cp
rp
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Related
show tcp statistics
Commands
Enter the keyword all to clear TCP statistics maintained on all
switch processors.
(OPTIONAL) Enter the cp to clear TCP statistics only from the
Control Processor.
(OPTIONAL) Enter the keyword rp1 to clear TCP statistics only
from the Route Processor.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— displays TCP traffic statistics.
IPv4 Routing 1177