Show Hg-Link-Bundle-Distribution - Dell C9000 Series Reference Manual

show hg-link-bundle-distribution

Display the operational status and link utilization in a HiGig link bundle.
C9000 Series
Syntax
show hg-link-bundle-distribution {sfm npu-id hg-port—channel hg-
port—channel-id | slot slot npuUnit npu-id hg-port—channel 0}
enable
Parameters
sfm npu-id hg-
port-channel hg-
port-channel-id
slot slot-id
npuUnit npu-id
hg-port-channel
0
Command Modes
EXEC, EXEC Privilege
Command History
Version
9.9(0.0)
9.2.(1.0)
9.3.0.0
Usage Information The following table illustrates the fields displayed in the output of this command:
Table 3. show hg-link-bundle-distribution Command Description
Field
Link-bundle trigger threshold
Slot
npuUnit
Specify a HiGig port channel on a switch SFM (spine) NPU by
entering the keyword sfm and SFM NPU ID, then hg-port-
channel and a HiGig port channel ID. SFM NPU ID is 0; SFM
HiGig port-channel IDs are 0 to 10.
Specify a HiGig port channel on a line-card (leaf) NPU by
entering the keyword slot and slot number, then npuUnit and
NPU ID, then hg-port-channel 0. Line-card slot numbers are
0 to 11; line-card NPU ID is 0. The HiGig port-channel ID is from
0 to 2.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000.
Description
Percentage value of link-bundle
bandwidth that serves as the threshold
for marking a link bundle as being
overutilized, triggering link-bundle
monitoring, and generating an SNMP
alarm.
Slot number of a line card.
Network processing unit (NPU) ID
number of a HiGig link bundle/port-
channel.
Interfaces 1038