Show Config - Dell C9000 Series Reference Manual

show config

Display the configuration in the batch mode.
C9000 Series
Syntax
show config [common | user | local]
Parameters
common
user
local
Command Modes CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
Example
Dell(conf-b)#show config
interface vlan 10
interface vlan 20
no shutdown
interface vlan 30
interface vlan 40
ip access-list standard stdacl1
Dell(conf-b)#
Dell(conf-b)#show config user
interface vlan 10
exit
interface vlan 20
no shutdown
exit
interface vlan 30
exit
interface vlan 40
exit
ip access-list standard stdacl1
exit
Displays the common configuration in the batch mode.
Displays the configuration done in the batch mode in an order
entered by the user.
Displays the local configuration in the batch mode.
Description
Introduced on the C9010.
Port Extenders (PE) 1734