Dell C9000 Series Reference Manual page 1295

rip
static
summary
Defaults none
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.7(0.1)
9.7(0.1)
9.7(0.0)
9.2(1.0)
9.0.0.0
8.3.19.0
8.3.7.0
8.2.1.0
7.8.1.0
7.4.1.0
Usage Information The following describes the show ipv6 route command shown in the following
examples.
Field
(undefined)
NOTE:
corresponding to the default VRF are displayed.
(OPTIONAL for E-Series only) View information for all IPv6 RIP
routes.
(OPTIONAL) View only routes configured by the ipv6 route
command.
(OPTIONAL) View a brief list of the configured IPv6 routes.
EXEC
EXEC Privilege
Description
Introduced on the C9010.
Introduced on the S3048-ON.
Introduced on the S4048-ON.
Added support for VRF. Introduced on S6000–ON
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the C-Series and S-Series.
Introduced on the E-Series TeraScale.
Description
Identifies the type of route:
• L = Local
• C = connected
• S = static
• R = RIP
If you do not specify this option, routes
IPv6 Basics 1295