Show Ipv6 Management-Route - Dell C9000 Series Reference Manual

summary
static
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.5.1.0
6.1.1.0
Example
Dell#show ip management-route
Destination
-----------
10.1.2.0/24
172.16.1.0/24
Dell#

show ipv6 management-route

Display the IPv6 static routes configured for the management interface.
C9000 Series
Syntax
show ipv6 management-route [all | connected | summary | static]
(OPTIONAL) Enter the keyword summary to view a table listing
the number of active and non-active routes and their sources.
(OPTIONAL) Enter the keyword static to view non-active
routes also.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced on the E-Series.
Gateway
-------
ManagementEthernet 0/0
10.1.2.4
State
-----
Connected
Active
IPv4 Routing 1224