Mac Learning-Limit Station-Move-Violation - Dell S6000 Reference Manual

mac learning-limit station-move-violation

Specify the actions for a station move violation.
S6000
Syntax
mac learning-limit station-move-violation {log | shutdown-both
| shutdown-offending | shutdown-original}
To disable a configuration, use the no mac learning-limit station-move-
violation command, then the configured keyword.
Parameters
log
shutdown-both
shutdown-
offending
shutdown-
original
Defaults none
Command INTERFACE (conf-if-interface-slot/port)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.8.1.0
Version 7.5.1.0
Usage This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Information
Related show mac learning-limit
Commands
870
Enter the keyword log to generate a syslog message on a
station move violation.
Enter the keyword shutdown to shut down both the original
and offending interface and generate a syslog message.
Enter the keywords shutdown-offending to shut down
the offending interface and generate a syslog message.
Enter the keywords shutdown-original to shut down the
original interface and generate a syslog message.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— displays details of the mac learning-limit.
Layer 2