Fefd Reset - Dell C9000 Series Reference Manual

fefd reset

Reset all interfaces or a single interface that was in "error-disabled" mode.
C9000 Series
Syntax
fefd reset [interface]
Parameters
interface
Defaults Not configured.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.12.0
Related
Commands
(OPTIONAL) Enter the following keywords and slot/port or
number information:
•
•
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
• fefd — enables far-end failure detection.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/ port information.
Layer 2 1344