Clns Host - Dell C9000 Series Reference Manual

traffic
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1

clns host

Define a name-to-network service mapping point (NSAP) that you use with commands that require NSAPs
and system IDs.
C9000 Series
Syntax
clns host name nsap
Parameters
name
nsap
Defaults Not configured.
Command Modes ROUTER ISIS
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
Clears IS-IS counters.
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Added support for VRF. Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Enter an alphanumeric string to identify the name-to-NSAP
mapping.
Enter a specific NSAP address that is associated with the name
parameter.
Intermediate System to Intermediate System (IS-IS) 1047