Dell C9000 Series Reference Manual page 841

crc32MSB |
crc32LSB | xor1 |
xor2 | xor4 | xor8 |
xor16}
seed seed-value
linecard slot-id |
port-set port-pipe
Defaults
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.10.0
8.1.1.0
7.8.1.0
7.7.1.1
6.5.1.0
• crc16cc: Use CRC16_CCITT — 16-bit CRC16 using
CRC16-CCITT polynomial
• crc32MSB: Use CRC32_UPPER — MSB 16 bits of
computed CRC32
• crc32LSB: Use CRC32_LOWER — LSB 16 bits of
computed CRC32
• xor1: Use CRC16_BISYNC_AND_XOR1 — Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor1
• xor2: Use CRC16_BISYNC_AND_XOR2 — Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor2
• xor4: Use CRC16_BISYNC_AND_XOR4 — Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor4
• xor8: Use CRC16_BISYNC_AND_XOR8 — Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor8
• xor16: Use CR16 — 16-bit XOR
Enter the keyword seed then the hash algorithm seed value.
The range is from 0 to 2147483646.
Enter the linecard slot-id parameters to specify a switch
line card. The slot IDs range from 0 to 11.
Enter the port-set port-pipe parameters to specify a port
pipe (set of ports) on the line card. The port-pipe range is from 0
to 3.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Added the nh-ecmp option.
Added the nh-ecmp option.
Added the line card option on TeraScale only.
Equal Cost Multi-Path (ECMP) 841