Management Crypto-Policy - Dell C9000 Series Reference Manual

Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.2(0.0)
Usage Information This command creates a crypto policy entry and enters the crypto policy configuration
mode for configuring the flow parameters.
Example
Dell(conf)#crypto ipsec policy West 10 ipsec-manual
Dell(conf-crypto-policy)#

management crypto-policy

Apply the crypto policy to management traffic.
C9000 Series
Syntax
management crypto-policy name
To remove the management traffic crypto policy, use the no management crypto-
policy name command.
Parameters
name
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000, S4810, and S4820T.
Enter the name for the crypto policy..
Description
Introduced on the C9010.
Introduced on the Z9500.
Internet Protocol Security (IPSec) 1158