Mac Learning-Limit Learn-Limit-Violation - Dell C9000 Series Reference Manual

mac learning-limit learn-limit-violation

Configure an action for a MAC address learning-limit violation.
C9000 Series
Syntax
mac learning-limit learn-limit-violation {log | shutdown}
To return to the default, use the no mac learning-limit learn-limit-
violation {log | shutdown} command.
Parameters
log
shutdown
Defaults none
Command Modes INTERFACE (conf-if-interface-slot/port)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.8.1.0
7.5.1.0
Usage Information This command is supported on physical interfaces, static LAGs, and LACP LAGs.
• clear mac-address-table
learned dynamically.
• mac learning-limit mac-address-sticky
move parameter.
• show mac learning-limit
Enter the keyword log to generate a syslog message on a
learning-limit violation.
Enter the keyword shutdown to shut down the port on a
learning-limit violation.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— clears the MAC address table of all MAC address
— Replaces deprecated no-station-
— displays MAC learning-limit configuration.
Layer 2 1317