Advertise Med Location-Identification - Dell C9000 Series Reference Manual

Version
8.3.19.0
8.3.11.1
8.3.7.0
7.7.1.0
7.6.1.0
Related
debug lldp interface
Commands
show lldp neighbors
show running-config lldp

advertise med location-identification

To advertise a location identifier, configure the system.
C9000 Series
Syntax
advertise med location-identification {coordinate-based value |
civic-based value | ecs-elin value}
To return to the default, use the no advertise med location-identification
{coordinate-based value | civic-based value | ecs-elin value}
command.
Parameters
coordinate-based
value
civic-based value
ecs-elin value
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Description
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
— debugs LLDP.
— displays the LLDP neighbors.
— displays the LLDP running configuration.
Enter the keywords coordinate-based then the coordinated
based location in hexadecimal value of 16 bytes.
Enter the keywords civic-based then the civic based location
in hexadecimal format. The range is from 6 to 255 bytes.
Enter the keywords ecs-elin then the Emergency Call Service
(ecs) Emergency Location Identification Number (elin) numeric
location string. The range is from 10 to 25 characters.
Link Layer Discovery Protocol (LLDP) 1383