Show Running-Config - Dell C9000 Series Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.0.2.0
8.5.1.0
8.4.2.1
8.2.1.0
7.8.1.0
7.4.1.0
Usage Information
Field
"Ingress IPv6..."
"seq 10..."
Example
Dell#show ipv6 accounting access-list
!
Ingress IPv6 access list V6-ACL on TenGigabitEthernet 10/1
Total cam count 2
seq 5 permit tcp any any count (0 packets)
seq 10 permit udp any any count (0 packets)

show running-config

Display the ACL running configurations.
C9000 Series
Syntax
show running-config {acl [ip | mac | ipv6]}
Parameters
acl
ip
ipv6
Description
Introduced on the C9010.
Introduced on the S6000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S-Series.
Introduced on the E-Series ExaScale.
Introduced on the C-Series. Increased the name string to accept
up to 140 characters. Prior to version 7.8.1.0, names are up to 16
characters long.
Introduced on the E-Series TeraScale.
Description
Displays the name of the IPv6 ACL, in this Example "AclList1".
Displays the filter. If the keywords count or byte were
configured in the filter, the number of packets or bytes
processed by the filter is displayed at the end of the line.
Enter the keyword acl to display all access-lists and acl sub commands.
Enter the keyword ip to display all ip access-list and the ip sub commands.
Enter the keyword ipv6 to display all ipv6 access-lists and ipv6 sub commands.
IPv6 Access Control Lists (IPv6 ACLs) 1264