Protocol Spanning-Tree Pvst - Dell C9000 Series Reference Manual

Executing IEEE compatible Spanning Tree Protocol
Root ID Priority 32773, Address 0001.e832.73f7
Root Bridge hello time 2, max age 20, forward delay 15
Bridge ID Priority 32773 (priority 32768 sys-id-ext 5), Address
0001.e832.73f7
We are the root of Vlan 5
Configured hello time 2, max age 20, forward delay 15
Interface Designated
Name
-------------------------------------------------------------
Te 0/10 128.140 128
Te 0/12 128.142 128
Interface
Name
--------------------------------------------------------
Te 0/10
Te 0/12
Related

protocol spanning-tree pvst

Commands
protocol spanning-tree pvst
To enable PVST+ on a device, enter the PVST+ mode.
C9000 Series
Syntax
protocol spanning-tree pvst
To disable PVST+, use the disable command.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
PortID Prio Cost
200000 FWD 0
200000 DIS 0
Role PortID Prio
Desg 128.140 128
Dis 128.142 128
– enter SPANNING TREE mode on the switch.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Sts Cost Bridge ID
32773 0001.e832.73f7 128.140
32773 0001.e832.73f7 128.142
Cost Sts Cost Link-type Edge
200000 FWD 0 P2P
200000 DIS 0 P2P
Per-VLAN Spanning Tree Plus (PVST+)
PortID
No
No
1642