Dell C9000 Series Reference Manual page 1601

Example
Table 5. show crypto ipsec sa ipv6 Command Description
Field
Interface
Link local address
IPSecv6 policy name
inbound/outbound ah
inbound/outbound esp
spi
inbound/outbound esp
spi
transform
in use settings
replay detection support
STATUS
Related
show crypto ipsec policy
Commands
encryption policies.
Example
Dell#show crypto ipsec policy
Dell#show crypto ipsec sa ipv6
Interface: TenGigabitEthernet 0/0
Link Local address: fe80::201:e8ff:fe40:4d10
IPSecv6 policy name: OSPFv3-1-500
inbound ah sas
– displays the configuration of IPsec authentication and
spi : 500 (0x1f4)
Description
IPv6 interface.
IPv6 address of interface
Name of the IPsec security policy applied
to the interface.
Authentication policy applied to inbound
or outbound traffic.
Encryption policy applied to inbound or
outbound traffic.
Security policy index number used to
identify the policy.
Encryption policy applied to inbound or
outbound traffic.
Security policy index number used to
identify the policy.
Security algorithm that is used to provide
authentication, integrity, and
confidentiality.
Transform that the SA uses (only
transport mode is supported).
Y: An SA has enabled the replay detection
feature.
N: The replay detection feature is not
enabled.
ACTIVE: The authentication or
encryption policy is enabled on the
interface.
Open Shortest Path First (OSPFv2 and OSPFv3) 1601